[Feb 25, 2023] Latest 156-585 Exam with Accurate Check Point Certified Troubleshooting Expert PDF Questions
Practice To 156-585 - DumpsReview Remarkable Practice On your Check Point Certified Troubleshooting Expert Exam
NEW QUESTION 49
Where will the usermode core files be located?
- A. /var/log/dump/usermode
- B. SCPDIR/var/log/dump/usermode
- C. SFWDlR/var'log/dump/usermode
- D. /var/suroot
Answer: A
NEW QUESTION 50
What is the simplest and most efficient way to check all dropped packets in real time?
- A. fw ctl zdebug * drop in expert mode
- B. cat /dev/fwTlog in expert mode
- C. tail -f SFWDIR/log/fw log |grep drop in expert mode
- D. Smartlog
Answer: C
NEW QUESTION 51
Troubleshooting issues with Mobile Access requires the following:
- A. Standard VPN debugs, packet captures, and debugs of cvpnd' process on Security Gateway
- B. 'ma_vpnd' process on Secunty Gateway
- C. Debug logs of FWD captured with the command - 'fw debug fwd on
TDERROR_MOBILE_ACCESS=5' - D. Standard VPN debugs and packet captures on Security Gateway, debugs of "cvpnd' process on Security Management
Answer: A
NEW QUESTION 52
You need to runa kernel debug over a longer period of time as the problem occurs only once or twice a week.
Therefore you need to add a timestamp to the kernel debug and write the output to a file What is the correct syntax for this?
- A. fw ctl kdebug -T -f > filename debug
- B. fw ctl kdebug -T -f -o filename debug
- C. fw ctl debug -T -f > filename debug
- D. fw ctl kdebug -T > filename debug
Answer: C
NEW QUESTION 53
What is the name of the VPN kernel process?
- A. CVPND
- B. VPND
- C. VPNK
- D. FWK
Answer: C
NEW QUESTION 54
What is the difference in debugging a S2S or C2S (using Check Point VPN Client) VPN?
- A. the C2S VPN uses a different VPN daemon and there a second VPN debug
- B. there is no difference
- C. the C2S client uses Browser based SSL vpn and can't be debugged
- D. the C2S VPN can not be debugged as it uses different protocols for the key exchange
Answer: C
NEW QUESTION 55
In Security Management High Availability, if the primary and secondary managements, running the same version of R80.x, are in a state of 'Collision', how can this be resolved?
- A. Run the command 'fw send synch force' on the primary server and 'fw get sync quiet' on the secondary server
- B. Administrator should manually synchronize the servers using SmartConsole
- C. Reset the SIC of the secondary management server
- D. The Collision state does not happen in R80.x as the synchronizing automatically on every publish action
Answer: B
NEW QUESTION 56
What is the main SecureXL database for tracking acceleration status of traffic?
- A. cphwd_tmp1
- B. cphwd_dev_identity_table
- C. cphwd_db
- D. cphwd_dev_conn_table
Answer: A
NEW QUESTION 57
What is the purpose of the Hardware Diagnostics Tool?
- A. Verifying that Security Gateway hardware is functioning correctly
- B. Verifying that Check Point Appliance hardware is functioning correctly
- C. Verifying the Security Management Server hardware is functioning correctly
- D. Verifying that Check Point Appliance hardware is actually broken
Answer: C
NEW QUESTION 58
Which of the following is a component of the Context Management Infrastructure used to collect signatures in user space from multiple sources, such as Application Control and IPS. and compiles them together into unified Pattern Matchers?
- A. cpas
- B. CMI Loader
- C. PSL - Passive Signature Loader
- D. Context Loader
Answer: B
NEW QUESTION 59
Which kernel process is used by Content Awareness to collect the data from contexts?
- A. CMI
- B. PDP
- C. cpemd
- D. dlpda
Answer: A
NEW QUESTION 60
For TCP connections, when a packet arrives at the Firewall Kemel out of sequence or fragmented, which layer of IPS corrects this lo allow for proper inspection?
- A. Context Management
- B. Protocol Parsers
- C. Passive Streaming Library
- D. Protections
Answer: A
NEW QUESTION 61
What are the four ways to insert an FW Monitor into the firewallkernel chain?
- A. Absolute position using location, absolute position using alias, relative position, all positions
- B. Absolute position using location, relative position using alias, general position, all positions
- C. Relative position using location, relativepositionusing alias, absolute position, all positions
- D. Relative position using geolocation relative position using inertial navigation, absolute position all positions
Answer: D
NEW QUESTION 62
After kernel debug with "fw ctl debug" you received a huge amount of information It was saved in a very large file that is difficult to open and analyze with standard text editors Suggest a solution to solve this issue.
- A. Reduce debug buffer to 1024KB and run debug for several times
- B. Use Check Point InfoView utility to analyze debug output
- C. Use "fw ctl zdebug' because of 1024KB buffer size
- D. Divide debug information into smaller files Use "fw ctl kdebug -f -o "filename" -m 25 - s "1024"
Answer: A
NEW QUESTION 63
Rules within the Threat Prevention policy use the Malware database and network objects. Which directory is used for the Malware database?
- A. $FWDlR/log/install_manager_tmp/ANTIMALWARBlog?
- B. $FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/
- C. $CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/
- D. $FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/
Answer: A
NEW QUESTION 64
Which command can be run in Expert mode lo verify the core dump settings?
- A. grep cdm /config/db/coredump
- B. grep cdm /config/db/initial
- C. cat /etc/sysconfig/coredump/cdm conf
- D. grep SFWDlR/config/db/initial
Answer: D
NEW QUESTION 65
What does CMI stand for in relation to the Access Control Policy?
- A. Context Management Infrastructure
- B. Content Matching Infrastructure
- C. Context Manipulation Interface
- D. Content Management Interface
Answer: A
NEW QUESTION 66
What process is responsible for sending and receiving logs in the management server?
- A. FWD
- B. FWM
- C. CPD
- D. CPM
Answer: A
NEW QUESTION 67
Which Threat Prevention daemon is the core Threat Emulator, engine and responsible for emulation files and communications with Threat Cloud?
- A. inmsd
- B. ctasd
- C. ted
- D. scrub
Answer: C
Explanation:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk97638
NEW QUESTION 68
Your fwm constantly crashes and is restarted by the watchdog. You can't find any coredumps related to this process, so you need to check If coredumps are enabled at all How can you achieve that?
- A. in expert mode run show core-dump status
- B. in dish run show core-dump status
- C. in dish run set core-dump status
- D. in dish run show coredumb status
Answer: D
NEW QUESTION 69
How does the URL Filtering Categorization occur in the kernel?
1. RAD provides the status of the search to the client.
2. The a-sync request is forwarded to the RAD User space via the RAD kernel for online categorization.
3. The online detection service responds with categories and the kernel cache is updated.
4. The kernel cache notifies the RAD kernel of hits and misses.
5. URL lookup initiated by the client.
6. URL lookup occurs in the kernel cache.
7. The client sends an a-sync request back to RAD If the URL was not found.
- A. 5, 6, 2, 4, 1, 7, 3
- B. 5, 6, 3, 1, 2, 4, 7
- C. 5, 6, 4, 1, 7, 2, 3
- D. 5, 6, 7, 1, 3, 2, 4
Answer: C
NEW QUESTION 70
What acceleration mode utilizes multi-core processing to assist with traffic processing?
- A. Traffic Warping
- B. HyperThreading
- C. SecureXL
- D. CoreXL
Answer: B
NEW QUESTION 71
If the cpsemd process of SmartEvent has crashed or is having trouble coming up. then it usually indicates that___________.
- A. The SmartEvent core on the Solr mdexer has been deleted
- B. Cpd daemon is unable to connect to the log server
- C. Postgres database ts down
- D. The logged in administrator does not have permissions to run SmartEvent
Answer: A
NEW QUESTION 72
An administrator receives reports about issues with log indexing and text searching regarding an existing Management Server. In trying to find a solution she wants to check if the process responsible for this feature is running correctly. What is true about the related process?
- A. solr is a child process of cpm
- B. fwm manages this database after initialization of the ICA
- C. fwssd crashes can affect therefore not show in the list
- D. cpd needs to be restarted manual to show in the list
Answer: A
NEW QUESTION 73
......
Exam Questions and Answers for 156-585 Study Guide Questions and Answers!: https://quizmaterials.dumpsreview.com/156-585-exam-dumps-review.html
